Can you shoot slugs out of a full choke

I was wondering: Is it possible to shoot slugs through this barrel when the choke is removed? And if so, would it damage the threads for the choke? You should not shoot slugs—or any other shot—through your barrel without a choke in place, since there is a very real possibility that you will damage the threading. The conventional wisdom has long been that these slugs perform best with an Improved Cylinder choke.

If your accuracy with this choke is acceptable, stick with it. RE: only shoot sabot slugs through a rifled barrel?

Yes you can shoot rifled slugs through a rifled barrel The accuracy might not be the best but it can be done Be sure to scrub your barrel very well afterwardsto remove all lead foulingDec 24, Consider a modern full-rifled gauge slug gun firing a high-tech grain sabot slug that leaves the muzzle at about 1, fps velocity. If zeroed at 50 yards still a popular sight-in distance among slug hunters , that slug only drops 1. A rifled-choke tube can improve accuracy.

The hollow point style slug features a tough, lead alloy core loaded to 1, feet per second. The compression style wad protects the slug at ignition and helps to seal the bore for maximum velocity.

Also, Use a Cylinder choke. When shooting slugs, you want zero constriction if possible. What it shows is that the 12 gauge slug will travel pretty flat for up to yards with perhaps 10 to 12 inches of drop at yards. At yards the chart shows a drop of about 4 feet. This was from a firearms study and suggests the absolute maximum a slug can travel is around feet yards. Some rifled slugs will tell you they can be fired through any choke but mention that improved cylinder chokes get the best performance usage.

Rifled slugs can be designed to deform through the narrower choke, but will lose both power and accuracy relative to a cylinder or improved cylinder choke. As you fire slugs through the more full chokes, with repeated use you will open the choke too much and change the nature of the choke.

Please keep reading to find out how a full choke works and which is the best choke for slugs. The original shotgun slugs were small balls small enough to slide through the barrel. Slugs have evolved over time and below are some of the most common types;. These slugs are heavier on the front part to ensure the front tip is always pointed forward during flight. This is also known as the shuttlecock mechanism.

Below are the most common full-bore slugs. They are also designed for smooth-bore shotguns. The ribs reduced friction as the bullet travelled through the barrel.

He also added a wad made of fiber or plastic that blocks the barrel preventing gases and pressure from escaping. This feature ensures the slugs have a higher muzzle velocity. In , Karl M. Foster designed the Foster slug. But he did this by creating a hollow section in the rear.